Can You Mix Toner With Bleach? 9 Steps to Follow

Hair toners are one of a kind, and they are used for several different reasons. Well, the most common use of a hair toner would be to use it after bleaching your hair. Hair toners would work perfectly when you are lightening the hair more. That is possibly why we advocate so strongly for using a toner to achieve the best-lighted shade on the hair. Hair toners are truly one of a kind, and they will lighten the hair without making it too harsh. When you have very dark hair at lengths and roots, and you want to go lighter, the perfect way would be to go blonde first.

Going blonde from a very dark hair color, on the other hand, is difficult because you have to go in a lot of different directions. And the paths are also limited because bleaching requires multiple sessions. And this will only harm the hair and not make a difference. That is why it is critical to use a product that does not require multiple bleaching sessions and leaves the hair light enough for the color to go on top. And for that reason, you have the toners. But can toners and bleaching be done in one session? Can you mix toner with bleach?

No, you cannot mix toner with bleach powder. Traditional or permanent toners are used with the activators or developers. The developer’s main theme is activating the products, which will later get rid of the black pigments and get the hair to lighten up. That is why using hair toners is the ideal way to achieve lighter shades, which can be damaging when using bleach. However, before using toners on your hair, you must first bleach it, and this must be done separately. Bleaching will lighten the hair, and toners will lighten the hair even more.

And that is why the toning process is done after the bleaching process. The bleaching will get rid of the dark pigments from the hair, and the toners will further get rid of the undertones with the help of a developer and tone the hair light.

What is bleach?

Hydrogen peroxide and sodium hypochlorite are the main ingredients in hair bleach, which tends to lift the dark pigments from the hair. You can elevate the hair’s dark tones using hair bleach and add another color on top. Hair bleaching is crucial if you have brown, black, or blond hair since the darkness prevents the topping color from showing through. Bleaching typically darkens hues that are too light, and ash-blonde would be a nice illustration. Additionally, the bleach is applied section by section, as you highlight. Hair is also bleached when color is applied over previously colored hair. Furthermore, most hairdressers recommend bleaching the hair to reveal its true color.

Bleaching your strands is not as difficult when your hair is light in color. However, bleaching will be difficult if you have dark hair since melanin, a black pigment found in most dark hair, is difficult to remove. And you need to employ a powerful bleaching chemical on those strands. Additionally, ammonia and hydrogen peroxide is applied to the hair as potent bleaching agents. In most cases, bleaching your hair more than once is necessary to achieve the proper golden hue. In this method, the hair will receive the necessary color lift. Most of the time, it may take more than one bleaching treatment to achieve the desired effects.

What is a hair toner?

While unique, hair toners are not the same as hair colors. The goal of utilizing toners is to tone your hair to the hue you want. And the toners would function precisely the same way on the hair. Unique and very gentle on the hair, hair toners are a unique product. They will add depth to the hair, not change the tint or undertone. And for this reason, toners are so highly valued.

Toners come in a variety of forms, such as shampoos, conditioners, tints, and glosses. They may also be used on the bases and the ends of the hair, among other areas of the hair. The toners also come in various hues; their goal is to help you obtain the hair color you’ve been hoping to achieve. The toners are unique, and they frequently appear natural on hair. And once again, the hair toners give the hair a good fade and an even appearance.

Many facts about hair would be altered if toners were used correctly. In general, bleaching is a fairly turbulent procedure that tends to alter the overall appearance of the hair. Additionally, there are extremely slim chances of success with hair coloring on the first try if you have really dark or black hair. And if you put another color on top of orange hair, the color changes and becomes completely different. And it commonly occurs when you apply a very light shade to the top of bleached hair.

To achieve the greatest results, you may add another layer of bleach, although doing so can weaken the hair’s general structure. Therefore, toning the hair first would be the best course of action. When your hair is the ideal light tone, you may next choose the color of your choice. Toners are also frequently used when you just wish to keep your hair’s natural lightness.

✨ You May like: Can You Leave Arctic Fox Hair Dye in Overnight

How should bleach be used in conjunction with hair toners?

Toners and bleaching are not synonymous. And they are most likely related rather than identical processes. The toning is done on the blonde hair to make it lighter. For example, when you have black hair, and you want to go light as dusty pink with your hair. Though, when you go with pink dye on top of black hair, even when you keep the dye for two months straight, the pink will not sit on top of the black hair; the best you can get is a pink hue on the hair, which will also last for a few washes.

The chances of your hair color changing completely to pink are nearly zero. And that’s why the first step would be to bleach your hair. And with one application of the bleach on black hair, the hair would most definitely turn orange or reddish orange. And when you go with another round of bleach, then it might take another week of waiting, and you are most likely to be stuck with orange hair. And thus, the best way would be to get a toner to lighten the hair more and then apply the hair color. Only then might you be able to get close to your actual color.

Step 1: Get your hair ready

You might want to hydrate the hair first before beginning to bleach it. Additionally, you’ll bleach your hair with fewer harmful chemicals. Use oils on your hair, for instance, for at least a week before using bleach. It will gain vigor from this and be prepared for the next day. The day before using the bleach, you could also wish to condition your hair by leaving it in a mask or using conditioner. Finally, to avoid discoloration of the skin, apply jelly around the skin.

Step 2: Select the appropriate developer

Bleach developers are the primary product that affects the bleaching process as a whole. So, the following is a list of developers along with their strengths:

• 40% developer = 12% strength
• 30 volume developer = 9.0% concentration
• 6% strength = 20 volume developer
• 10 developer volumes = 3% strength

The developers serve as an activator for the hair and remove the color from it. They will aid the bleach powder’s efficacy. Use 20 developers for the roots and 30 developers for the ends of the hair when bleaching dark hair. Ten developers will only slightly raise the color, while forty developers may cause harm to the hair.

Step 3: Use the bleach combination

You may wish to use the appropriate amount of hair if you want to bleach the hair adequately. Both the developer, hydrogen peroxide, and bleach powder are required. And for that, you’ll need developer and bleach powder in a 1:2 ratio.

Step 4: Splitting the hair

You could choose to style a piece of hair with a professional comb and clips while bleaching your hair. Start with relatively small sections and a hair length of approximately an inch. And if you’re going to bleach your hair, you might want to start at the ends. Lastly, take care of the hair roots. Last but not least, attempt to wrap the hair with aluminum foil and leave it in place for at least 15 minutes.

Step 5: Examine the hair

Finally, to ensure that the hair is applied correctly, you may inspect each strand individually to ensure it has taken on the desired color. Keep your hair down for a minimum of 30 minutes and a maximum of 45 minutes.

Step 6: Wash the hair

Start washing your hair when the time is up. Consider washing your hair with a purple shampoo if you notice the hair bleach becoming orange. And be sure to properly cleanse your skin and hair with everything.

Step 7: Check the level of bleach

When you are done bleaching the hair, you might have to find out the level of bleach in the hair. Only after you’ve decided on the bleach level can you begin the toning process for your hair. Otherwise, you may need to repeat the bleaching procedure to achieve the desired results. For the level of bleached hair, you have to go from level 1 (black hair) to level 9 (very light blonde) or level 10 (extra light blonde). Once you get to the light level, you can proceed with the hair toners.

Step 8: pre-toning the hair

Well, here you would be going with a purple mask at first to make sure that the reddish or orangish tone from the hair is gone a bit. These types of masks would be ideal for restoring moisture to your hair while also repairing any damage. Pre-toning can also be done with a purple shampoo or conditioner. Keep it going for half an hour.

Step 9: Tone your hair

When you are trying to go for an ash or silver blonde, then toners are applied. Toners would take the hair from warm to cool. When you are done bleaching, you most likely have yellow or orange left on your hair. As you tone the hair, it will turn cool, and the overall look will be cool-toned. Well, toners might not fix the uneven or deep blonde colors, but they will only change the hue of the hair. To use the toner, here are some steps:

• Use a 20-volume developer along with toner and mix. For the ratio of mixing toners and developers, you have to mix 20 ounces of the developer with 1 ounce of the toner. So the ratio would be 20:1 for developers and toners.
• Start with the midlength of the hair when the toner is being applied, and then go for the roots of the hair.
• Wait for the toner to dry for about 20 to 30 minutes, and then get off the toner with a thorough wash.

FAQs

Final Thoughts

The first step of dyeing your hair would be to apply bleach. And the next step would be to tone the hair. Well, toners play a huge part in the lightning process as they tend to cancel out the color of the hair. For example, purple cancel our orange. But the toners are mostly used when you want to look like a blonde bombshell. This means when you want lighter hair, instead of adding color to it, mostly toners are used then. Well, toners come in different shades, and by using one, you get the color you want. The color here would be less opaque than regular hair color, but they might be less harsh. And they also give a good fade without staining the hair. With permanent toners, the developers are used to getting the best possible results by letting them penetrate the hair cuticles. But bleaching and toning are completely different processes; you cannot mix toner with bleach.

Key Points

1. Toner and bleach powder cannot be combined, and the activators or developers are used with conventional or permanent toners. The developer’s major focus is on activating the products so that they can subsequently get rid of the black pigments and cause the hair to become lighter.
2. Usually, bleaching is done to make too-light colors darker. Ash-blonde might provide a good example. In addition, as you highlight, the bleach is done in sections. When color is placed over previously colored hair, hair is also bleached.
3. The toners also come in a variety of colors, and their purpose is to assist you in achieving the hair color you’ve been longing to have. The toners are distinctive, and they typically make hair look natural. The hair toners also once again give the hair a beautiful fade and an even look.

✨ Next Attraction: How to Make Blue Toner for Orange Hair?